News

The important structure of LED UFO mining lamp for workshop lighting

The main structural feature of the LED circular UFO mining light is compact. Compared with the traditional mining shed, it is not only very small in size, easy to transport and install, but also light in weight and not easy to occur safety accidents. LED circular flying saucer mining light is mainly composed of the following parts:

The important structure of LED UFO mining lamp for workshop lighting插图
h5 UFO high bay light

 

  1. LED chip

The structural design of the LED circular UFO mining light is to enable the LED chip to dissipate heat quickly and effectively during the working process. The performance of the LED chip will affect the luminous efficiency, light decay and life of the entire lighting fixture. The circular luminous surface can maximize the lighting range, and the ground illuminance is relatively uniform.

 

  1. Heat sink

LED chip will heat when working, overheating will affect the life of LED chip. Therefore, the heat sink design of the LED circular UFO mining lamp is to allow the LED chip to dissipate heat in time and maintain efficient and durable lighting. The material of the heat sink is generally aluminum alloy. Aluminum alloy has good thermal conductivity. Magnesium aluminum alloy is a new type of heat dissipation material in recent years, magnesium aluminum alloy is characterized by light weight and good heat dissipation performance.

 

  1. Light distribution

Optical design is a very important part of lighting. Different installation heights and ground illuminance requirements require different optical designs. Under the same luminous efficiency, the power and light distribution of the LED circular UFO mining lamp will affect the ground illuminance, and the greater power means more power consumption, so the light distribution can play a better role in this case. The common light distribution of the LED circular UFO mining lamp is 120°, and the narrower light distribution is 90° and 60°. If your installation height is higher than 5m or requires a ground illuminance greater than 200lux, it is best to choose a narrow light distribution to meet lighting needs.