Due to the characteristics of its shape, the LED circular mining lamp is also known as the UFO mining lamp. At present, LED circular flying saucer mining lamp products have been very mature. Small shape, high light efficiency, can meet the requirements of a variety of indoor and semi-indoor places. Generally, people will link the LED circular UFO mining lights with the lighting of factories and warehouses. In fact, it can be widely used in many more places. For example, school auditoriums, toll stations, indoor stadiums, large supermarkets, car showrooms and so on.
The important structure of LED UFO mining lamp
The main structural feature of the LED circular UFO mining light is compact. Compared with the traditional mining shed, it is not only very small in size, easy to transport and install, but also light in weight and not easy to occur safety accidents. LED circular flying saucer mining light is mainly composed of the following parts:
- LED chip
The structural design of the LED circular UFO mining light is to enable the LED chip to dissipate heat quickly and effectively during the working process. The performance of the LED chip will affect the luminous efficiency, light decay and life of the entire lighting fixture. The circular luminous surface can maximize the lighting range, and the ground illuminance is relatively uniform.
- Heat sink
LED chip will heat when working, overheating will affect the life of LED chip. Therefore, the heat sink design of the LED circular UFO mining lamp is to allow the LED chip to dissipate heat in time and maintain efficient and durable lighting. The material of the heat sink is generally aluminum alloy. Aluminum alloy has good thermal conductivity. Magnesium aluminum alloy is a new type of heat dissipation material in recent years, magnesium aluminum alloy is characterized by light weight and good heat dissipation performance.
- Light distribution
Optical design is a very important part of lighting. Different installation heights and ground illuminance requirements require different optical designs. Under the same luminous efficiency, the power and light distribution of the LED circular UFO mining lamp will affect the ground illuminance, and the greater power means more power consumption, so the light distribution can play a better role in this case. The common light distribution of the LED circular UFO mining lamp is 120°, and the narrower light distribution is 90° and 60°. If your installation height is higher than 5m or requires a ground illuminance greater than 200lux, it is best to choose a narrow light distribution to meet lighting needs.
